hawk.gif (3189 bytes)

Hoverhawk Corporation

Heavy Duty Commercial-Grade Fabric with welded seams and joints make these Inflatable Boats and Pontoons last and last, with a 5-Year warranty included. Double fabric thickness on tops and bottoms to resist  abrasion, rocks, grinding sand and wear. Easy to repair too.

Our Telephone Numbers:
1-251-609-0969 in USA
+1-251-609-0969 outside USA

Email to:  hoverhawkcorp (at) gmail.com

 SUMMER PONTOON & BOAT SALE !

Plus, 50% Discount on UPS Ground shipping to the 48 Contiguous U.S. States, OR
 get a $50 shipping Cost Credit to other Locations !

MaxxNMMA Logo.png (34222 bytes)

 

MAXXON Inflatable Pontoon Sets

Inflatable Pontoons are sold and priced in sets of 2 (a pair).  Pontoons and rafts are made of heavy, commercial-duty coated polyester 1100 denier, 40 ounce fabric with an extra layer of fabric on top and bottom to resist wear. Seams are all welded-not glued.  Easily repaired if damaged, with a repair kit and inflation foot pump included. The 10 feet and longer sizes have multiple air chambers for flotation security. The high quality Leafield C7 air fill valves can be locked open for easy deflation and compact storage. Replacement inflatable pontoons are available.

Instant Boat Tip
Each pontoon has several "D-rings" attached on both sides to attach to almost anything you want to float.  For example, mount a pair of pontoons with rope or straps to a sheet of plywood (or to a larger platform of your design) and you have an instant boat or barge or floating work platform ! To mount the pontoons, drill 2 holes in a plywood sheet, or your platform floor, per pair of pontoon D-rings to align with each set D-rings below on the pontoon to be mounted. Drill the holes a distance apart equal to the width of the pontoon. Put a "boat cleat" between the 2 holes. Add one cleat for each rope if you want individual tie off points for your lashings. Tie a strong low-stretch rope (braided Dacron, Dyneema, etc.) to each D-ring using a "bowline" or similar knot. Then thread the other end of the rope up through the holes and tie off to the cleat mounted above. If using an engine to propel your boat, add some additional lashing lines mounted forward of your existing lashings to at least the front 2 sets of pontoon D-rings to create a 30 to 45 degree angle back to the D-rings on the pontoons. This setup prevents the pontoons from sliding backward against the increased drag caused by moving forward in the water under power. Add an outboard motor or air drive or sails for propulsion. Now you have an instant inflatable pontoon boat or barge that is stable, secure and can be assembled and disassembled quickly and easily !

Use our large or small inflatable pontoons to make barges, inflatable pontoon boats, catamaran or trimaran sailboats, house boats, airboats, fishing platforms, temporary boat dock, inflatable boat dock, floating work platforms, swim platforms, etc. Install them in tandem (end to end) to make longer, larger vessels of 40'+ long and 25'+ wide, or in parallel for heavier loads. Take care not to exceed 50% of the total load capacity of your pontoons to insure floatation security. All our pontoons have multiple air chambers per pontoon (except 9 foot model) for additional floatation security Only your imagination limits the many uses for these pontoons. Shipped to you direct from our warehouse.

Click here to see the MANY uses for these pontoons!

Maxxon9tubes.jpg (13490 bytes)

maxxon pontoon set 26 x 30.jpg (23932 bytes)

Our largest--26 feet long by 30 inch diameter pontoon set shown above

STURDY, DURABLE CONSTRUCTION THROUGHOUT

Maxxon_Tech_Materiel_spec.jpg (65575 bytes)

Our XPT Pontoon Series is made of premium, commercial-grade 0.9 mm 1100 denier PVC that offers strength and protection against extreme abrasion and enhances chemical resistance. The inner layer is comprised of a 36-ounce, 77-pound-tear-strength polyester fabric that offers further dimensional stability and tensile strength. An additional outer layer of 1100 denier PVC is welded, not glued, to the top and bottom for even more wear resistance and strength.

Their multiple air chambers offer floatation security, while their high-quality air-fill valves can be locked open for easy deflation and compact storage.

Each pontoon offers several D-rings on each side to allow you to attach almost anything you want to float. Attach a sheet of plywood with some rope using a bowline knot! An instant boat. Use our inflatable pontoons to create barges, sailboats, fishing or swimming platforms, and more. The sea's the limit!

Each pontoon comes with an inflation foot pump and repair kit for emergencies.

The XPT Pontoon Series are among Maxxon's best-selling boats and for good reason: their lightweight portability allows travel convenience while their durability offers peace of mind. Expect only the best boating experience with the XPT.

Pontoon Specifications:
Made of Heavy-Duty, Commercial-Grade 0.9 mm 1100 Denier PVC in Its Entirety
Welded Seams
Multiple Air Chambers
Rated Pressure for Tube: 3.6 psi/0.25 bar
Multiple 2-Inch Stainless Steel D-Rings on Each Side
Top & Bottom Chafing Pads (Black)
Additional Standard Equipment: Foot Pump and Repair Kit
5-Year Warranty
Priced and Sold as a Pair

 for sale yacht tenders MAXXON Pontoon Prices--Per Pair

Click here to see the MANY uses for these pontoons!

Model #

Length Diameter Inches/cm Air Chambers Per Tube D-Rings Per Tube Weight Per Tube Retail Price USD (pair) Sale Price USD (pair)
XPT-09/15w 9 ft.(274 cm) 15.3 / 39 One 6 (3 per side) 14 lb (6.4 kg) $999.99 $799
XPT-10/18w 10 ft.(304 cm) 18.5 / 47 Two 8 (4 per side) 18 lb (8.2 kg) $1,199.99 $989
XPT-12/20w 12 ft.(366 cm) 20 / 51 Two 8 (4 per side) 22 lb (9.9 kg) $1,399.99 $1,120
XPT-12/25w 12 ft.(366 cm) 25 / 64 Two 8 (4 per side) 26 lb (11.8 kg) $1,449.99 $1,159
XPT-14/21w 14 ft (427 cm) 21 / 54 Two 8 (4 per side) 27 lb (12.2 kg) $1,649.99 $1,320
XPT-14/25w 14 ft (427 cm) 25 / 64 Two 8 (4 per side) 30 lb (13.6 kg)) $1,699.99 $1,360
XPT-16/25w 16 ft.(488 cm) 25 / 64 Two 8 (4 per side) 35 lb (15.9 kg) $1,849.99 $1,689
XPT-22/30w 22 ft.(670 cm) 30 / 76 Four 12 (6 per side) 62 lb (28.1 kg) $2,799.99 $2,390
XPT-26/30w 26 ft.(792 cm) 30 / 76 Four 12 (6 per side) 71 lb (32.2 kg) $3,099/99 $2,599

MAXXON Pontoon Flotation Capacity--Per Pair

Model #

50% / *30% Capacity
XPT-9/15w 619 lbs./371 lbs. Flotation
XPT-10/18w 1039 lbs./623 lbs. Flotation
XPT-12/20w 1550 lbs./930 lbs. Flotation
XPT-12/25w 1960 lbs./1176 lbs. Flotation
XPT-14/21w 1829 lbs./1097 lbs. Flotation
XPT-14/25w. 2738 lbs./1643 lbs. Flotation
XPT-16/25w 3160 lbs./1896 lbs. Flotation
XPT-22/30w 6115 lbs./3669 lbs. Flotation
XPT-26/30w 7350 lbs./4410 lbs. Flotation

All of our pontoons have multiple air chambers per pontoon, except the 9 foot model.

===============

creditcardsymbols  
Or pay by Bank Wire Transfer
Or Western Union World-Wide

 

MAXXON RIVER RAFTS
Introducing the new self-bailing River Rafts for 2021. These whitewater rafts are built with the same integrity and craftsmanship you would expect from us. They are specially built to withstand the ruggedness of white water and have the durability to handle commercial guide and outfitter services.

Maxxon XSB 270-320.png (238307 bytes)

MSRP $1,799 USD  SALE Price $1,440 plus shipping

           XSB-270w Utility Raft Specifications:
• Heavy-Duty, Commercial-Grade 0.9 mm 1100 Denier PV C with Welded Seams
• Outside Length and Width: 8 ft 10 in x 4 ft 8 in (270 cm x 143 cm)
• Inside Length and Width: 5 ft 10 in x 21 in (180 cm x 53 cm)
• Tube Diameter: 18 in (45 cm)
• Air Chambers: 2
• Inflatable Thwarts: 1 (Batten Attachment System)
• Floor Thickness: 4 in (10 cm) Inflatable Drop Stit ch (Glued-In)
• Top and Bottom Chafers: 0.9 mm 1100 Denier PV C
• Floor Wrap: 0.9 mm 1100 Denier PV C
• Comfort-Grip Handles: 2
• Stainless Steel D-Rings: 6
• Kick Height: 2 ft (61 cm)
• Rated Pressure for Tube: 3.6 psi/ 0.25 bar
• Rated Pressure for Floor: 6.5 psi/ 0.45 bar
• Max Load: 1,256 lb (570 k g)
• Max Person: 3
• Raft weight: 58 lb (26 k g)
• Package Weight: 60 lb (27 kg)
• Package Size: 44 in x 24 in x 16 in (110 cm x 60 cm x 40 cm)
• Additional Standard Equipment: Carry Bag, Foot Pump and Repair Kit
• 5-Year Warranty
• Color Options: Blue and Orange

XSB-270w • 8 FT 10 IN SELF-BAILING RAFT

Designed for professional guiding outfits but with the consumer in mind, the self-bailing Maxxon XSB-270 raft is where to start in size, utility and rafting fun.

Whether for thrill seekers challenging hydraulics, or floated with a single angler fishing frame, this 8-foot 10-inch utility raft is a craft for all waters.

At only 58 pounds, the bow and stern carry handles make this an easy carry to the water, while the generous 17-inch diameter chambers assure exceptional flotation in all categories of water.

Triple thermal-welded seams utilized with stout, 0.9 mm 1100 denier PVC, coupled with additional 1100 denier PVC top and bottom chafers protect this boat from mid river boulders and shore side wear.

The 4-inch drop-stitch floor virtually eliminates failure experienced with outdated I-beam floor construction.

Trouble-free Leafield C7 valves provide the expected industry standard for inflation/deflation and serviceability.

Six, 2-inch 316 stainless st eel D-ring tie-down points provide gear and frame se curing options unmatched by any raft in its class.

Maxxon XSB 320.png (237239 bytes)

MSRP $1,849 USD  SALE Price $1,480 plus shipping

        XSB-320w Utility Raft Specifications:
• Heavy-Duty, Commercial-Grade 0.9 mm 1100 Denier PV C with Welded Seams
• Outside Length and Width: 10 ft 6 in x 4 ft 8 in (320 cm x 143 cm)
• Inside Length and Width: 7 ft 6 in x 21 in (230 cm x 53 cm)
• Tube Diameter: 18 in (45 cm)
• Air Chambers: 2
• Inflatable Thwarts: 1 (Batten Attachment System)
• Floor Thickness: 4 in (10 cm) Inflatable Drop-Stit ch (Glued-In)
• Top and Bottom Chafers: 0.9 mm 1100 Denier PV C
• Floor Wrap: 0.9 mm 1100 Denier PV C
• Stainless Steel D-Rings: 6
• Comfort-Grip Handles: 2
• Kick Height: 2 ft (61 cm)
• Rated Pressure for Tube: 3.6 psi/ 0.25 bar
• Rated Pressure for Floor: 6.5 psi/ 0.45 bar
• Max Load: 1,500 lb (680 k g)
• Max Person: 4
• Raft Weight: 65 lb (29 k g)
• Package Weight: 69 lb (31 k g)
• Package Size: 43 in x 24 in x 16 in (110 cm x 60 cm x 40 cm)
• Additional Standard Equipment: Carry Bag, Foot Pump and Repair Kit
• 5-Year Warranty
• Color Options: Orange, red, light gray, blue, light green
  XSB-320w • 10 FT 6 IN SELF-BAILING RAFT
Designed for professional guiding outfits and cataraft anglers, but with the consumer in mind, the Maxxon XSB-320 self-bailing raft is our next step in durability, utility and rafting fun.

The perfect choice for four on a whitewater adventure, or floated with a dual angler fishing frame, this 10-foot 6-inch utility raft is a craft for all waters.

At 65 pounds, the bow and stern carry handles make this an easy carry to the water, while the generous 18-inch diameter chambers assure exceptional flotation in all categories of water.

Triple thermal welded seams utilized with stout, 1100 denier PVC coupled with additional 1100 denier PVC top and bottom chafers protects the 320 from mid river boulders and shore side w ear.

The 4-inch drop-stitch floor virtually eliminates failure experienced with I-beam floor c onstruction.

Trouble-free Leafield C7 valves provide the expected industry standard for inflation/deflation and serviceability.

With six, 2-inch 316 stainless st eel D-ring tie-down points provide gear and frame securing options to handle any application.

Maxxon XSB-390-2.png (124812 bytes)

MSRP $2,599 USD  SALE Price $2,080 plus shipping

       XSB-390w Utility Raft Specifications:

• Heavy-Duty, Commercial-Grade 0.9 mm 1100 Denier PV C with Welded Seams
• Outside Length and Width: 12 ft 9 in x 4 ft 8 in (390 cm x 192 cm)
• Inside Length and Width: 9 ft 6 in x 3 ft (290 cm x 53 cm)
• Tube Diameter: 20 in (50cm)
• Air Chambers: 4
• Inflatable Thwarts: 3 (Batten Attachment System)
• Floor Thickness: 6 in (15 cm) Inflatable Drop-Stit ch (Glued-In)
• Top and Bottom Chafers: 0.9 mm 1100 Denier PV C
• Full Bottom Wrap: 0.9 mm 1100 Denier PV C
• Stainless Steel D-Rings: 14
• Comfort-Grip Handles: 6
• Kick Height: 2 ft 5 in (78 cm)
• Rated Pressure for Tube: 3.6 psi/ 0.25 bar
• Rated Pressure for Floor: 6.5 psi/ 0.45 bar
• Max Load: 2,870 lb (1,300 k g)
• Max Person: 7
• Raft Weight: 114 lb (52 k g)
• Package Weight: 122 lb (55 k g)
• Package Size: 48 in x 29 in x 16 in (122 cm x 72 cm x 41 cm)
• Additional Standard Equipment: Carry Bag, Foot Pump and Repair Kit
• 5-Year Warranty
• Color Options:  Orange, red, light gray, blue, light green
XSB-390w • 12 FT  9 IN SELF-BAILING RAFT

With design direction from professional guide outfitters and cataraft frame builders, the Maxxon XSB-390 self-bailing raft is our premium construction for lightweight durability.

Built for the aggressive whitewater adventure, or floated with a multi-angler fishing frame, this 12-foot-9 utility raft is ready for whatever your adventure serves up.

At only 114 pounds, the durable six carry handles make this an easy carry to the water, while the massive 20-inch diamet er chambers assure exceptional flotation and a high ride in all cat egories of water.

Triple thermal welded seams utilized with stout, 1100 denier PVC primary raft construction. The hull is then fully bottom wrapped in another layer of 1100 denier PVC, coupled with additional 1100 denier PV C top and bottom chafers. This raft is a brute!

The 6-inch drop-stitch floor virtually eliminates failure experienced with I-beam floor c onstruction.

Trouble-free Leafield C7 valves provide the expected industry standard for inflation/deflation and serviceability.

Fourteen, 2-inch 316 stainless st eel D-ring tie-down points provide gear and frame se curing options to handle any gear or tie-down application
.

Maxxon XSB-430.png (219348 bytes)

MSRP $2,799 USD  SALE Price $2,240 plus shipping

         XSB-430w Utility Raft Specifications:

• Heavy-Duty, Commercial-Grade 0.9 mm 1100 Denier PV C with Welded Seams
• Outside Length and Width: 14 ft x 6 ft 11 in (430 cm x 213c m)
• Inside Length and Width: 10 ft 9 in x 3 ft 8 in (330 cm x 113 cm)
• Tube Diameter: 20 in (50 cm)
• Air Chambers: 4
• Inflatable Thwarts: 3 (Batten Attachment System)
• Floor Thickness: 6 in (15 cm) Inflatable Drop-Stitch (Glued-In)
• Top and Bottom Chafers: 0.9 mm 1100 Denier PV C
• Full Bottom Wrap: 0.9 mm 1100 Denier PV C
• Stainless Steel D-Rings: 14
• Comfort-Grip Handles: 6
• Kick Height: 2 ft 6 in (78 cm)
• Rated Pressure for Tube: 3.6 psi/ 0.25bar
• Rated Pressure for Floor: 6.5 psi/ 0.45 bar
• Max Load: 3,170 lb (1,436 k g)
• Max Person: 9
• Raft Weight: 132 lb (60 k g)
• Package Weight: 142 lb (64 k g)
• Package Size: 51 in x 32 in x 17 in (130 cm x 81 cm x 42 cm)
• Additional Standard Equipment: Carry Bag, Foot Pump and Repair Kit
• 5-Year Warranty
• Color Options:  Orange, red, light gray, blue, light green

XSB-430w • 14 FT  6 IN SELF-BAILING RAFT

The first Maxxon raft choice by guide outfitters, the XSB-430 self-bailing raft is another in our premium construction for lightweight durability.

Built for the aggressive whitewater adventure, this 14-foot raft is ready for whatever water your adventure serves up.

At only 132 pounds, our client guides rave at the ease of carrying this raft to the water and then stowing it at the end of the day. The standard 20-inch diameter chambers assure exceptional flotation and a high ride in all categories of white water, providing a handling experience uncommon to its class.

Triple thermal welded seams utilized with stout, 1100 denier PVC primary raft construction. The hull is then fully bottom wrapped in another layer of 1100 denier PVC, coupled with additional 1100 denier PV C top and bottom chafers.

The 6-inch drop-stitch floor virtually eliminates failure experienced with I-beam floor construction.

Trouble-free Leafield C7 valves provide the expected industry standard for inflation/deflation and serviceability.

Fourteen, 2-inch 316 stainless steel D-ring tie-down points provide gear and frame se curing options to handle any gear or tie-down application.

Maxxon XSB-390-2.png (124812 bytes)

MSRP $3,399 USD  SALE Price $2,720 plus shipping

       XSB-490w Utility Raft Specifications:


• Heavy-Duty, Commercial-Grade 0.9 mm 1100 Denier PVC with Welded Seams
• Outside Length and Width: 16 ft x 7 ft 8 in (490 cm x 234 cm)
• Inside Length and Width: 12 ft 9 in x 4 ft 4 in (390 cm x 134 cm)
• Tube Diameter: 20 in (50 cm)
• Air Chambers: 4
• Inflatable Thwarts: 3 (Batten Attachment System)
• Floor Thickness: 6 in (15 cm) Inflatable Drop-Stit ch
• Top and Bottom Chafers: 0.9 mm 1100 Denier PVC
• Full Bottom Wrap: 0.9 mm 1100 Denier PVC
• Stainless Steel D-Rings: 14
• Comfort-Grip Handles: 6
• Kick Height: 2 ft 6 in (78 cm)
• Rated Pressure for Tube: 3.6 psi/ 0.25bar
• Rated Pressure for Floor: 6.5 psi/ 0.45 bar
• Max Load: 3,629 lb (1,646 k g)
• Max Person: 12
• Raft Weight 150 lb (68 k g)
• Package Weight: 166 lb (75 k g)
• Package Size: 55 in x 32 in x 17 in (140 cm x 81 x 42 cm)
• Additional Standard Equipment: Carry Bag, Foot Pump and Repair Kit
• 5-Year Warranty
• Color Options:  Orange, red, light gray, blue, light green

   XSB-490w • 16FT  SELF-BAILING RAFT

Our largest standard sized model, the XSB-490 self-bailing raft is another in our premium construction for lightweight durability.

Built for the aggressive whitewater adventure, this 16-foot raft is ready for whatever water your adventure serves up.

At 150 pounds, this model wins praise for managing the transition to and from the water and then stowing it at the end of the day. The standard 20-inch diameter chambers assure exceptional flotation and a high ride in all categories of white water, providing a handling experience uncommon to its class.

Triple thermal welded seams utilized with stout, 1100 denier PVC primary raft construction. The hull is then fully bottom wrapped in another layer of 1100 denier PVC, coupled with additional 1100 denier PVC top and bottom chafers.

The 6-inch inflatable drop-stitch floor virtually eliminates failure experienced with I-beam floor construction.

Trouble-free Leafield C7 valves provide the expected industry standard for inflation/deflation and serviceability
.

Fourteen, 2-inch stainless steel D-ring tie-down points provide gear and frame securing options to handle any gear or tie-down application.

 

creditcardsymbols  
Or pay by Bank Wire Transfer
Or Western Union World-Wide

50% Discount on UPS Ground shipping to the 48 Contiguous U.S. States !

Our Telephone Numbers:
1-251-609-0969 in USA
+1-251-609-0969 outside USA

Email to:  hoverhawkcorp (at) gmail.com

================

ORDER FORM

QUOTE REQUEST FORM

The various boats shown on this page may be shipped by UPS, Federal Express or other carriers world-wide

BACK TO HOVERHAWK HOME PAGE

Maxxon, ON SALE, Heavy Duty PVC Inflatable Boats, Pontoons, Kayaks, Dinghies, River Rafts Heavy duty PVC Maxxon inflatable boats, kayaks, dinghies, dinghy, for sale, river rafts, raft, pontoons, portable, easily repaired, back packable, shipped world-wide, watercraft inflatable boats, maxxon boats, maxon dinghies, dinghy, sport boats, kayaks, river rafts, rafts, yacht tenders, for sale, pontoons, Maxxon, PVC, portable, heavy duty, repairable, back packable, inflatable watercraf
==========================

Copyright 2021

SELLER'S NOTICE AND DISCLAIMERS

Product prices, specifications, and availability are subject to change without notice. Products and materials advertised on this website are sold with the understanding that the buyer assumes all risks and hazards involved in their use or application.  Buyer/User acknowledges assumption of all risks, hazards and further indemnifies seller by purchasing and/or using or reselling the products advertised and sold on this website. No express or implied warranties are asserted nor fitness of merchantability claimed by Seller. All sales are final.  Warranty claims are solely limited to the manufacturer's warranty for any product defects in materials and/or workmanship.  All returns must be pre-approved in advance or will otherwise be rejected and returned to sender at buyer's/sender’s expense.  Seller's liability is limited only to the amount paid to Seller for the product purchased.  Any legal dispute shall be conducted in the State of Alabama, in Baldwin County. All items to be returned, for any reason,  must be authorized by us in advance and a RMA number must be issued, which must be attached in plain sight near rhe shipping label.  Otherwise the sender is responsible for the return shipping costs or the costs of disposition of the returned goods.